1. Power
Washing
- Environmentally-friendly detergent or
bleach is used to remove dirt & mildew as required.
- Delicate areas are hand-washed.
- Loose paint chips are cleaned up.
- House is given time to dry.
- Driveways & decks cleaned upon
request.
|
|
2. Scraping,
Priming & Minor Maintenance
- All loose paint is removed, all bare
areas are primed.
- Glossy areas are scuff-sanded.
- Feather-sanding and stripping done on
request.
- Areas around doors and windows are
caulked, window panes receive new putty where necessary.
- Wood, masonry and stucco repairs
available upon request or when specified on the contract.
|
|
3. Painting
- Full finish coat is applied to proper
coverage & finish.
- All non-painted surfaces are covered
to protect against splatter & drips.
- Paint is applied with a brush, roller,
or sprayer depending on the surface.
- Second coat is available upon request
or when specified on the contract.
- Only premium quality paints are used.
|
|
4. Clean-Up
- Performed daily and upon completion of
the job.
- All garbage is removed.
- Plant beds cleaned and paint chips
removed.
- Touch-up paint is labeled & left
with the customer.
- Outdoor fixtures & furniture
replaced.
|
|
5. Inspection
- Before the crew packs up their
equipment, a "wet walk-around" is done to ensure all
contracted areas are painted properly.
- Final touch-ups are noted on a 'punch
list' & are completed before the crew leaves.
- A
INTOPPA
Painting Co.
Standard Inspection
is performed by the
INTOPPA
Painting Co.
owner.
- The INTOPPA
Painting Co.
Customer Comment Card is
completed by the customer.
|
The Five Steps to a Beautiful
Interior...
|
1. Setup
- Rooms and areas to be painted are
scheduled with the customer.
- Large furniture is moved into the
center of the room.
- Wall and ceiling fixture are removed.
- Furniture is covered with plastic.
- Floors are covered with drop cloths.
|
|
2. Prep
- Walls are scuff-sanded.
- Holes and cracks in walls are filled.
- Gaps in trim are caulked.
- Stains, such as water marks, are
sealed.
- Washing is done where required.
|
|
3. Painting
- Repaired areas are primed.
- Paint is applied with a brush, roller
or sprayer depending on the surface.
- Ceiling and walls are painted to
proper coverage and finish color.
- Clean cut lines between trim &
walls.
- Only premium quality paints are used.
|
|
4. Clean-Up
- Furniture is moved back to original
positions.
- Wall and ceiling fixtures are
replaced.
- Floors and carpets are thoroughly
vacuumed and swept.
- All garbage is removed.
- Touch-up paint is labeled and left
with the customer.
|
|
5. Inspection
- Before the crew packs up their
equipment, a "wet walk-around" is done to ensure all
contracted areas are painted properly.
- Final touch-ups are noted on a 'punch
list' & are completed before the crew leaves.
- A
INTOPPA
Painting Co.
Inspection
is performed by the
INTOPPA
Painting Co.
owner.
- The INTOPPA
Painting Co.
Customer Comment Card is
completed by the customer.
|